By Mark D. Tyrol, P.E.
Battic Door Energy Conservation Products

Imagine leaving a window open all winter long — the heat loss, cold drafts and wasted energy! If your home has a folding attic stair, a whole house fan or AC Return, a fireplace or a clothes dryer, that may be just what is occurring in your home every day.

These often overlooked sources of heat loss and air leakage can cause heat to pour out and the cold outside air to rush in — costing you higher heating bills.

Air leaks are the largest source of heating and cooling loss in the home. Air leaks occur through the small cracks around doors, windows, pipes, etc. Most homeowners are well aware of the benefits caulk and weatherstripping provide to minimize heat loss and cold drafts.

But what can you do about the four largest “holes” in your home — the folding attic stair, the whole house fan or AC return, the fireplace, and the clothes dryer? Here are some tips and techniques that can easily, quickly and inexpensively seal and insulate these holes.

Attic Stairs

When attic stairs are installed, a large hole (approximately 10 square feet) is created in your ceiling. The ceiling and insulation that were there have to be removed, leaving only a thin, unsealed, sheet of plywood.

Your attic space is ventilated directly to the outdoors. In the winter, the attic space can be very cold, and in the summer it can be very hot. And what is separating your conditioned house from your unconditioned attic? That thin sheet of plywood.

Often a gap can be observed around the perimeter of the door. Try this yourself: at night, turn on the attic light and shut the attic stairway door — do you see any light coming through? These are gaps add up to a large opening where your heated/cooled air leaks out 24 hours a day. This is like leaving a window open all year round.

An easy, low-cost solution to this problem is to add an attic stair cover. An attic stair cover provides an air seal, reducing the air leaks. Add the desired amount of insulation over the cover to restore the insulation removed from the ceiling.

Whole House Fans and AC Returns

Much like attic stairs above, when whole house fans are installed, a large hole (up to 16 square feet or larger) is created in your ceiling. The ceiling and insulation that were there have to be removed, leaving only leaky ceiling shutter between the house and the outdoors.

An easy, low-cost solution to this problem is to add a whole house fan cover. Installed from the attic side, the whole house fan cover is invisible. Cover the fan to reduce heating and air-conditioning loss, remove it when use of the fan is desired.

If attic access is inconvenient, or for AC returns, a ceiling shutter cover is another option for reducing heat loss through the ceiling shutter and AC return. Made from R-8, textured, thin, white flexible insulation, and installed from the house side over the ceiling shutter with Velcro, a whole house fan shutter cover is easily installed and removed.

Fireplaces

Sixty-five percent, or approximately 100 million homes, in North America are constructed with wood or gas burning fireplaces. Unfortunately there are negative side effects that the fireplace brings to a home especially during the winter home-heating season. Fireplaces are energy losers.

Researchers have studied this to determine the amount of heat loss through a fireplace, and the results are amazing. One research study showed that an open damper on an unused fireplace in a well-insulated house can raise overall heating-energy consumption by 30 percent.

A recent study showed that for many consumers, their heating bills may be more than $500 higher per winter due to the air leakage and wasted energy caused by fireplaces.

Why does a home with a fireplace have higher heating bills? Hot air rises. Your heated air leaks out any exit it can find, and when warm heated air is drawn out of your home, cold outside air is drawn in to make up for it. The fireplace is like a giant straw sucking the heated air from your house.

An easy, low-cost solution to this problem is to add a fireplace draftstopper. Available from Battic Door, a company known for their energy conservation products, a fireplace draftstopper is an inflatable pillow that seals the damper, eliminating any air leaks. The pillow is removed whenever the fireplace is used, then reinserted after.

Clothes Dryer Exhaust Ducts

In many homes, the room with the clothes dryer is the coldest room in the house. Your clothes dryer is connected to an exhaust duct that is open to the outdoors. In the winter, cold air leaks in through the duct, through your dryer and into your house.

Dryer vents use a sheet-metal flapper to try to reduce this air leakage. This is very primitive technology that does not provide a positive seal to stop the air leakage. Compounding the problem is that over time, lint clogs the flapper valve causing it to stay open.

An easy, low-cost solution to this problem is to add a dryer vent seal. This will reduce unwanted air infiltration, and keep out pests, bees and rodents as well. The vent will remain closed unless the dryer is in use. When the dryer is in use, a floating shuttle rises to allow warm air, lint and moisture to escape.

If your home has a folding attic stair, a whole house fan, an AC return, a fireplace, and/or a clothes dryer, you can easily, quickly and inexpensively seal and insulate these holes. At Battic Door Energy Conservation Products, we have developed solutions to these and other energy-conservation related issues.

For more information on Battic Door’s energy conservation solutions and products, visit http://www.batticdoor.com or send a S.A.S.E. to P.O. Box 15, Mansfield, MA 02048.

Mark D. Tyrol is a Professional Engineer specializing in cause and origin of construction defects. He developed several residential energy conservation products including an attic stair cover and a fireplace draftstopper. To learn more visit http://www.batticdoor.com

In order to insure energy and economic independence as well as better economic growth without being blackmailed by foreign countries, our country, the United States of America’s Utilization of Energy Sources must change.
“Energy drives our entire economy.” We must protect it. “Let’s face it, without energy the whole economy and economic society we have set up would come to a halt. So you want to have control over such an important resource that you need for your society and your economy.” The American way of life is not negotiable.
Our continued dependence on fossil fuels could and will lead to catastrophic consequences.

The federal, state and local government should implement a mandatory renewable energy installation program for residential and commercial property on new construction and remodeling projects with the use of energy efficient material, mechanical systems, appliances, lighting, retrofits etc. The source of energy must be by renewable energy such as Solar-Photovoltaic, Geothermal, Wind, Biofuels, Ocean-Tidal, Hydrogen-Fuel Cell etc. This includes the utilizing of water from lakes, rivers and oceans to circulate in cooling towers to produce air conditioning and the utilization of proper landscaping to reduce energy consumption. (Sales tax on renewable energy products and energy efficiency should be reduced or eliminated)

The implementation of mandatory renewable energy could be done on a gradual scale over the next 10 years. At the end of the 10 year period all construction and energy use in the structures throughout the United States must be 100% powered by renewable energy. (This can be done by amending building code)

In addition, the governments must impose laws, rules and regulations whereby the utility companies must comply with a fair “NET METERING” (the buying of excess generation from the consumer at market price), including the promotion of research and production of “renewable energy technology” with various long term incentives and grants. The various foundations in existence should be used to contribute to this cause.

A mandatory time table should also be established for the automobile industry to gradually produce an automobile powered by renewable energy. The American automobile industry is surely capable of accomplishing this task. As an inducement to buy hybrid automobiles (sales tax should be reduced or eliminated on American manufactured automobiles).

This is a way to expedite our energy independence and economic growth. (This will also create a substantial amount of new jobs). It will take maximum effort and a relentless pursuit of the private, commercial and industrial government sectors’ commitment to renewable energy – energy generation (wind, solar, hydro, biofuels, geothermal, energy storage (fuel cells, advance batteries), energy infrastructure (management, transmission) and energy efficiency (lighting, sensors, automation, conservation) (rainwater harvesting, water conservation) (energy and natural resources conservation) in order to achieve our energy independence.

“To succeed, you have to believe in something with such a passion that it becomes a reality.”

Jay Draiman, Energy Consultant
Northridge, CA. 91325
Feb. 26, 2007

P.S. I have a very deep belief in America’s capabilities. Within the next 10 years we can accomplish our energy independence, if we as a nation truly set our goals to accomplish this.
I happen to believe that we can do it. In another crisis–the one in 1942–President Franklin D. Roosevelt said this country would build 60,000 [50,000] military aircraft. By 1943, production in that program had reached 125,000 aircraft annually. They did it then. We can do it now.
“the way we produce and use energy must fundamentally change.”
The American people resilience and determination to retain the way of life is unconquerable and we as a nation will succeed in this endeavor of Energy Independence.

The Oil Companies should be required to invest a substantial percentage of their profit in renewable energy R&D and implementation. Those who do not will be panelized by the public at large by boy cutting their products.

Solar energy is the source of all energy on the earth (excepting volcanic geothermal). Wind, wave and fossil fuels all get their energy from the sun. Fossil fuels are only a battery which will eventually run out. The sooner we can exploit all forms of Solar energy (cost effectively or not against dubiously cheap FFs) the better off we will all be. If the battery runs out first, the survivors will all be living like in the 18th century again.

Every new home built should come with a solar package. A 1.5 kW per bedroom is a good rule of thumb. The formula 1.5 X’s 5 hrs per day X’s 30 days will produce about 225 kWh per bedroom monthly. This peak production period will offset 17 to 2

4 cents per kWh with a potential of $160 per month or about $60,000 over the 30-year mortgage period for a three-bedroom home. It is economically feasible at the current energy price and the interest portion of the loan is deductible. Why not?

Title 24 has been mandated forcing developers to build energy efficient homes. Their bull-headedness put them in that position and now they see that Title 24 works with little added cost. Solar should also be mandated and if the developer designs a home that solar is impossible to do then they should pay an equivalent mitigation fee allowing others to put solar on in place of their negligence. (Installation should be paid “performance based”).

Installation of renewable energy and its performance should be paid to the installer and manufacturer based on “performance based” (that means they are held accountable for the performance of the product - that includes the automobile industry). This will gain the trust and confidence of the end-user to proceed with such a project; it will also prove to the public that it is a viable avenue of energy conservation.

Installing a renewable energy system on your home or business increases the value of the property and provides a marketing advantage. It also decreases our trade deficit.

Nations of the world should unite and join together in a cohesive effort to develop and implement MANDATORY RENEWABLE ENERGY for the sake of humankind and future generations.
The head of the U.S. government’s renewable energy lab said Monday (Feb. 5) that the federal government is doing “embarrassingly few things” to foster renewable energy, leaving leadership to the states at a time of opportunity to change the nation’s energy future. “I see little happening at the federal level. Much more needs to happen.” What’s needed, he said, is a change of our national mind set. Instead of viewing the hurdles that still face renewable sources and setting national energy goals with those hurdles in mind, we should set ambitious national renewable energy goals and set about overcoming the hurdles to meet them. We have an opportunity, an opportunity we can take advantage of or an opportunity we can squander and let go,”
solar energy - the direct conversion of sunlight with solar cells, either into electricity or hydrogen, faces cost hurdles independent of their intrinsic efficiency. Ways must be found to lower production costs and design better conversion and storage systems.
FEDERAL BUILDINGS WITH SOLAR ENERGY – Renewable Energy
All government buildings, Federal, State, County, City etc. should be mandated to be energy efficient and must use renewable energy on all new structures and structures that are been remodeled/upgraded.
“The goverment should serve as an example to its citizens”
Jay Draiman

Northridge, CA 91325
Email: renewableenergy2@msn.com

REEDSPORT, Ore. — A power cooperative in the Northwest and a company in New Jersey have agreed to work together on a wave-energy field off the coast of Southern Oregon that utilizes buoys.

The buoys are moored loosely to the seabed and the natural motion of the waves causes the buoys to move up and down. Then a mechanical device uses that movement to drive an electric generator, according to the Web site of Ocean Power Technologies.

Ocean Power Technologies, headquartered in Pennington, N.J., plans to place the first of its buoys about 2.5 miles off the coast about 164 feet deep.

Under the agreement, Pacific Northwest Generating Cooperative would provide much of the financing for the buoy to be deployed near Winchester Bay. It would also buy the power generated by the two-megawatt unit.

PNGC Power is a power-generating cooperative that serves 15 distribution cooperatives in Oregon, Washington state, Idaho, Montana, Utah, Nevada and Wyoming.

The two enterprises said in a press release that the Federal Energy Regulatory Commission gave preliminary approval Feb. 15 for up to 50 megawatts of power to be generated from the site.

Reedsport Mayor Keith Tymchuk said the company envisions as many as 200 of the buoys eventually in the wave park. “This is an incredibly exciting project,” said Tymchuk, a leader of a state-level team appointed by Gov. Ted Kulongoski to help expedite the development and permitting of projects.

“It has huge potential, not just for the local area but for the entire state, which is rapidly becoming the world leader in wave power development and related projects,” he told The World newspaper of Coos Bay.